Part No:AN2T2T31
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED
TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
Weight: 23.4 lbs ( kg)
|
|
|
 |
|
| Water Flow Style |
LDH In Line Valve |
| Operation Energy Source |
Manual |
| Waterway Size |
3.65 inch (92.7mm) |
| Valve Actuation Method |
Handwheel (6 Inch, Injection Molded Nylon) |
| Valve Design |
Ball Valve (Aluminum) |
| Coupling Size Side A |
5.0 inch (125mm) |
| Coupling Swiveling/Rigid Side A |
Swivel (full time, even after tightening) |
| Connection Type Side A |
Storz |
| Coupling Size Side B |
5.0 inch (125mm) |
| Coupling Swiveling/Rigid Side B |
Swivel (full time, even after tightening) |
| Connection Type Side B |
Storz |
| Pressure Relief Valve |
Has PRV |
| Finish |
Powdercoated Stardust Silver |
| Gear Box Style |
Shaft on Side |
| Material |
Lightweight Cast Aluminum Alloy |
|
New User?
