56 Products Found

XFIH-DP1A HURRICANE DUAL HNDWHL CODE-RPF 4" INLET XFIH-TP1A   XFIH-T21A-Z HURRICANE TILLER W/CRANK 4" ANSI 150 INL The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-D42A HURRICANE DUAL HNDWHL DN80 PN16INLET   XFIH-DR1A HURRICANE DUAL HWHL 4.5"QC 4"ANSI INLET   XFIH-DL1A HURRICANE DUAL HNDWHL CODE-RLF 3" INLET   XFIH-DW1A-Z HURRICANE DUAL CRANK OSCILLATING INLET   XFIH-T41A HURRICANE TILLER DN80 PN16INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-T11A-Z HURRICANE TILLER W/CRANK 3" ANSI 150 INL The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83 mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6 mm) is provided for a pressure gauge. 2.5" male NH (64 mm) outlet threads are standard. 2.5" male BSP (64 mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-T61A HURRICANE TILLER 3.0"NPTF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-D41A HURRICANE DUAL HNDWHL DN80 PN16INLET   XFIH-D61A HURRICANE DUAL HWHL 3.0"NPT FEMALE INLET   XFIH-TQ1A HURRICANE TILLER 4.5"NHF QUICK CONNECT The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-TS1A HURRICANE TILLER 4.5"QC 4"NPTF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-TX1A HURRICANE TILLER CODE-RRM INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-D11A HURRICANE DUAL HNDWHL 3"ANSI INLET   XFIF-PLNJ HURRICANE MONITOR ALUMINUM The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIE-FPNJ-Z HURRICANE MONITOR - EXTENDED W/ CRANKS The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFI-PLNJ-Z HURRICANE MONITOR ALUMINUM W/CRANKS The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIH-TT1A HURRICANE TILLER 4.5"QC CODE-RLF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-D21A-Z HURRICANE DUAL CRANK 4"ANSI INLET   XFI-FPNJ HURRICANE The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port ¼" NPT (6 mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIH-D11A-01 HURRICANE DUAL HNDWHL 3"ANSI INLET   XFI-FLNJ HURRICANE The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port ¼" NPT (6 mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIH-DX1A-Z HURRICANE DUAL CRANK CODE-RRM INLET   XFIH-D52A-Z HURRICANE DUAL CRANK DN100 PN16 INLET   XFIH-TU1A HURRICANE TILLER 4.5"QC CODE-RPF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFI-OXY HURRICANE MONITOR ALUMINUM The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIE-FPNJ HURRICANE The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port ¼" NPT (6 mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIH-TP1A-Z HURRICANE TILLER CODE-RPF 4" INLET   XFIH-DX1A HURRICANE DUAL HWHL CODE-RRM INLET   XFIH-D12A HURRICANE DUAL HNDWHL 3"ANSI INLET   XFIH-DS1A HURRICANE DUAL HWHL 4.5"QC 4"NPTF INLET   XFIH-TX1A HURRICANE TILLER CODE-RRM INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XPI-FPBJ HURRICANE MONITOR ALUMINUM   XPI-FDN80BJ HURRICANE MONITOR ALUM - 2.5"BSP OUTLET   XFI-FPNJ-RAL HURRICANE MONITOR ALUMINUM - RAL 3000 The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIE-FPNJ-Z HURRICANE MONITOR - EXTENDED W/ CRANKS The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIH-D21A HURRICANE DUAL HNDWHL 4" ANSI 150 INLET   XFIH-D11A-Z HURRICANE DUAL CRANK 3"ANSI INLET   XFIH-TT1A HURRICANE TILLER 4.5"QC CODE-RLF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-T71A HURRICANE TILLER 4"NPT FEMALE INLET   XFI-FPNJ HURRICANE The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port ¼" NPT (6 mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XPI-BPBJ HURRICANE - ALUMINUM 2.5"BSP M OUTLET   XFIH-TW1A-Z HURRICANE TILLER OSCILLATING INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.   XFIH-D71A HURRICANE DUAL HWHL 4.0"NPT FEMALE INLET   XFIH-D61A-Z HURRICANE DUAL CRANK 3.0"NPTF INLET   XFIH-DQ1A HURRICANE DUAL HWHL 4.5"NHF QUICKCONNECT   XFIH-D12A HURRICANE DUAL HNDWHL 3"ANSI INLET   XFIH-DS1A HURRICANE DUAL HWHL 4.5"QC 4"NPTF INLET   XPI-FPBJ HURRICANE MONITOR ALUMINUM   XFI-FPNJ-RAL HURRICANE MONITOR ALUMINUM - RAL 3000 The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.   XFIH-D11A-Z HURRICANE DUAL CRANK 3"ANSI INLET   XFIH-T71A HURRICANE TILLER 4"NPT FEMALE INLET   XPI-BPBJ HURRICANE - ALUMINUM 2.5"BSP M OUTLET   XFIH-D71A HURRICANE DUAL HWHL 4.0"NPT FEMALE INLET   XFIH-DL1A-01 HURRICANE DUAL HNDWHL CODE-RLF 3" INLET LONG DESCRIPTION