| 300 Products Found |
|
AR1T2T2T2T |
HYDRANT ASSIST VALVE 5" STORZ/L
|
|
|
AN3R1T02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN5P2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN5P1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AV5NJ-NJ-RAL |
VALVE 2.5"NHF X 2.5"NHM - RAL RED
|
|
|
AN5P2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN5P1T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
AN4P7P02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
AR5P2T1T1T |
HYDRANT ASSIST VALVE 4.0" HANDLE/FS
|
|
|
AV5LNJ-NJ |
GATED ELBOW 90 DEG LFT 2.5"NHF X 2.5"NHM
|
|
|
AN4P7P01 |
IN-LINE VALVE W/PRV PARALLEL GB
|
|
|
AN3T2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN6T2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN6T2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
ARS5X2P2P2P |
HYDRANT ASST SO VALVE 6.0"NHF HANDLE/FS
|
|
|
|
|
ARS5X2P2P2P |
HYDRANT ASST SO VALVE 6.0"NHF HANDLE/FS
|
|
AN1T1T02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (89, 100, 115, 125 or 150mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾ inch (19mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
AN1T1T01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (89, 100, 115, 125 or 150mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾ inch (19mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN2X2X02 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Tightening inlet design makes these models ideal for use on apparatus or fixed systems when the valve needs to retain its position after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS5P1P1P1P |
HYDRANT ASST SO VALVE 4.0"NHF HANDLE/FS
|
|
|
AV5IJ-NJ |
VALVE 2.5"NPSHF X 2.5"NHM
|
|
|
AN2T7P02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN5R2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN5R2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
AR5R1T1T1T |
HYDRANT ASSIST VALVE 4.5" HANDLE/FS
|
|
|
AR5R3N7R3N |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
AR5P7R7R5R |
HYDRANT ASSIST VALVE 4.0" HANDLE/FS
|
|
|
AN5R2X02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
ARS5R2T2T2T |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
ARSFG2P2P2P |
HYDRANT ASST SO VALVE CODE-FG HANDLE/FS
|
|
|
|
|
AN3P1P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3P1P02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN4T2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN4T2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
ARS2R2T2T2T |
HYDRANT ASST SO VALVE 4.5" STORZ
|
|
|
AN6R2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN6P3N01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN2P2P32 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Tightening inlet design makes these models ideal for use on apparatus or fixed systems when the valve needs to retain its position after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS5R1T7R1T |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
|
AR5P1T1T1T |
HYDRANT ASSIST VALVE 4.0"NHF HANDLE/FS
|
|
|
AN3R2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AVGGS2FSS |
HYDRANT VALVE W/ GAUGE INLET CODE-S
|
|
AV5NJ-NJ |
2.5" (65mm) QUARTER TURN HYDRANT VALVE Quarter-turn aluminum ball valves provide a positive shutoff. Full flow 2.5" (65 mm) waterway provides maximum flow with minimal loss. Quarter turn valve handle has low force to move even under pressure. Rugged lightweight aluminum alloy casting with durable powder coat finish inside and out, hard coat anodized couplings, super tough nylon folding handle. 2.5" (65 mm) NH female swivel rocker lug inlet coupling is standard.
|
|
|
AN5P5P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
AR5T2P2P2P |
HYDRANT ASSIST VALVE 5.0" HANDLE/FS
|
|
|
|
|
AN5P5P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AR2T2P2P2P |
HYDRANT ASSIST VALVE 5" STORZ
|
|
|
AN2P2P31 |
IN-LINE VALVE W/PRV STANDARD GB
|
|
|
AR3R3T2T2T |
HYDRANT ASSIST VALVE 4.5"NHF RL/FS
|
|
|
AN3R1T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN3R2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3R1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
AN3P7P02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
AN3P7P01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AR5X1P1P1P |
HYDRANT ASSIST VALVE 6.0"NHF HANDLE/FS
|
|
|
AN6T7T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN4R1T02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AR3P2P2P2P |
HYDRANT ASSIST VALVE 4.0"NHF RL/FS
|
|
|
AN1T3P02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
ARS5R7P5P5P |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
|
|
|
AN4X7X02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN3P2T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN2P2P31 |
IN-LINE VALVE W/PRV STANDARD GB
|
|
|
AR5R7N7R3N |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
AN1T2T01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (89, 100, 115, 125 or 150mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾ inch (19mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AR3R3T2T2T |
HYDRANT ASSIST VALVE 4.5"NHF RL/FS
|
|
|
ARS3N2P2P2P |
HYDRANT ASST SO VALVE 3.5"NHF RL/FS
|
|
|
AN3P7R01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3R1T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
ARS2P2P2P2P |
HYDRANT ASST SO VALVE 4" STORZ LONG DESCRIPTION
|
|
|
AN1T1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN4P2T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN3R2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN4P2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3R1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
|
|
AR5X1P1P1P |
HYDRANT ASSIST VALVE 6.0"NHF HANDLE/FS
|
|
|
AN1T2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN6T7T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
AR5R1P7R1P |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AN4R2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN4R1T02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN4R2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AR3P2P2P2P |
HYDRANT ASSIST VALVE 4.0"NHF RL/FS
|
|
|
AN4X7X02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN5P1P32 |
IN-LINE VALVE WITH
PARALLEL SHAFT DRIVE GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
AR5R2T1T1T |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AR5R7N7R3N |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AN1T3P02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AR5T7T7T5T |
HYDRANT ASSIST VALVE 5.0"NHF HANDLE/FS
|
|
|
ARS5R7P5P5P |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
|
|
|
AN3P7P01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN3T7T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AR5X1P1P1P |
HYDRANT ASSIST VALVE 6.0"NHF HANDLE/FS
|
|
|
AR5R1P7R1P |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AR5T7T7T5T |
HYDRANT ASSIST VALVE 5.0"NHF HANDLE/FS
|
|
AR2P2P2P2P |
HYDRANT ASSIST VALVE 4" STORZ LONG DESCRIPTION
|
|
|
AN6T7T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN4R1T02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN3T2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3T1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AR3P2P2P2P |
HYDRANT ASSIST VALVE 4.0"NHF RL/FS
|
|
|
AN6R7R01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
ARS5R7P7P5P |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
AN3T2T02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS5R1T1T1T |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
|
|
|
AR5R7R7R3R |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
ARS5P2P2P2P |
HYDRANT ASST SO VALVE 4.0"NHF HNDL/FS LONG DESCRIPTION
|
|
AR5R7N7R5R |
HYDRANT ASSIST VALVE 4.5" HANDLE/FS
|
|
|
AN7L2P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
ARS5R1P1P1P |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
|
ARS2P1P1P2P |
HYDRANT ASST SO VALVE 4" STORZ
|
|
|
AR5P7N7P3N |
HYDRANT ASSIST VALVE 4.0"NHF HANDLE/FS
|
|
AR3P7P7P3P |
HYDRANT ASSIST VALVE 4.0" RL/FS
|
|
AN3R1T22 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
AN5R1T01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN3P2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AV5LHNJ-NJ |
GATED ELBOW 90 DEG LFT 2.5"NHF X 2.5"NHM
|
|
AR5R7R1P1P |
HYDRANT ASSIST VALVE 4.5" HANDLE/FS
|
|
|
AN2P5P01 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN3P1P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
|
|
AN6R1T02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
AR1T1T1T1T |
HYDRANT ASSIST VALVE 5" STORZ/L
|
|
|
AN3P3P32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
AR2T1T1T1T |
HYDRANT ASSIST VALVE 5" STORZ
|
|
AR5T1P1P1P |
HYDRANT ASSIST VALVE 5.0"NHF HANDLE/FS
|
|
|
AL41P1 |
4-WAY VALVED MANIFOLD W/ PRV
|
|
|
AN4P2T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN6T2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3P5P32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN3P7P32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN6X1T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN3P7P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
AN3T7T32 |
IN-LINE VALVE WITH
PARALLEL SHAFT DRIVE GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AR3R1T1T1T |
HYDRANT ASSIST VALVE 4.5"NHF RL/FS
|
|
|
AN3P5P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
|
|
AV5LHNJ-NJ |
GATED ELBOW 90 DEG LFT 2.5"NHF X 2.5"NHM
|
|
|
AN2T3P01 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN2P5P01 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN5P2T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN2T2T31 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN2T2T32 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Tightening inlet design makes these models ideal for use on apparatus or fixed systems when the valve needs to retain its position after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN5P2T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
AR5P1P1P1P |
HYDRANT ASSIST VALVE 4.0" HANDLE/FS
|
|
|
AV5RHNJ-NJ |
GATED ELBOW 90 DEG RT 2.5"NHF X 2.5"NHM
|
|
AN3R3R32 |
IN-LINE VALVE WITH
PARALLEL SHAFT DRIVE GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN6P2T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN4X4X02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AV5A-A |
VALVE CODE-A-F X CODE-A-M
|
|
|
AR3N1T1T1T |
HYDRANT ASSIST VALVE 3.5"NHRL/FS
|
|
|
AVGSC2SNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
|
|
AN6X1T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN7T7T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN6P2T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN3P5P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN4R2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3T7T32 |
IN-LINE VALVE WITH
PARALLEL SHAFT DRIVE GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AV5A-A |
VALVE CODE-A-F X CODE-A-M
|
|
|
AVGSC3FNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
AVGSC2SNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
AN3T7T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AV5LFP-NJ-SC |
GATED ELBOW 90 DEG LFT 4" ANSI X 2.5"NHM
|
|
|
AN6R7R01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
AR2P1P1P1P |
HYDRANT ASSIST VALVE 4" STORZ
|
|
AV5HNJ-NJ |
2.5" (65mm) QUARTER TURN HYDRANT VALVE Quarter-turn aluminum ball valves provide a positive shutoff. Full flow 2.5" (65 mm) waterway provides maximum flow with minimal loss. Quarter turn valve handle has low force to move even under pressure. Rugged lightweight aluminum alloy casting with durable powder coat finish inside and out, hard coat anodized couplings, super tough nylon folding handle. 2.5" (65 mm) NH female swivel long handle inlet coupling is standard.
|
|
|
ARS5R1T1T1T |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
|
|
|
AN5P2T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AL35P0 |
3-WAY VALVED MANIFOLD
|
|
|
AN5P2T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AR5P1P1P1P |
HYDRANT ASSIST VALVE 4.0" HANDLE/FS
|
|
|
AN3R3R32 |
IN-LINE VALVE WITH
PARALLEL SHAFT DRIVE GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN7T7T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN4X4X02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN4R2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AR3N1T1T1T |
HYDRANT ASSIST VALVE 3.5"NHRL/FS
|
|
|
AVGSC3FNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
AN4R7R02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN4R2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AV5HNJ-NJ |
2.5" (65mm) QUARTER TURN HYDRANT VALVE Quarter-turn aluminum ball valves provide a positive shutoff. Full flow 2.5" (65 mm) waterway provides maximum flow with minimal loss. Quarter turn valve handle has low force to move even under pressure. Rugged lightweight aluminum alloy casting with durable powder coat finish inside and out, hard coat anodized couplings, super tough nylon folding handle. 2.5" (65 mm) NH female swivel long handle inlet coupling is standard.
|
|
AR3R2T2T2T |
HYDRANT ASSIST VALVE 4.5" RL/FS
|
|
|
ARS3X1P1P1P |
HYDRANT ASST SO VALVE 6.0"NHF RL/FS
|
|
|
|
AN5R7R31 |
IN-LINE VALVE WITH STANDARD GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN7X7X02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN7T2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AR5P2T2T2T |
HYDRANT ASSIST VALVE 4.0"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
ARS1T1T1T1T |
HYDRANT ASST SO VALVE 5" STORZ/L
|
|
|
AN5P1T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
AR3P2T2T2T |
HYDRANT ASSIST VALVE 4.0"NHF RL/FS
|
|
|
AN3P3P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN4P2P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
ARS5P7P7P5P |
HYDRANT ASST SO VALVE 4.0"NHF HANDLE/FS
|
|
|
AVGSC3SNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
AN3P2P32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AL43R0 |
4-WAY VALVED MANIFOLD LONG DESCRIPTION
|
|
|
AN4P1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AR3R2P2P2P |
HYDRANT ASSIST VALVE 4.5"NHF RL/FS
|
|
|
|
|
AN5P1P32 |
IN-LINE VALVE WITH
PARALLEL SHAFT DRIVE GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AVGSC2SHNJNJ |
HI-RISE VALVE LH W/ GAUGE
|
|
|
AR5R1P7R1P |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AR5T7T7T5T |
HYDRANT ASSIST VALVE 5.0"NHF HANDLE/FS
|
|
|
AN7T7T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AR2P2P2P2P |
HYDRANT ASSIST VALVE 4" STORZ LONG DESCRIPTION
|
|
|
AN4R2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN3T2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AVGSC3FNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
ARS5R7P7P5P |
HYDRANT ASST SO VALVE 4.5"NHF HANDLE/FS
|
|
|
AV5HNJ-NJ |
2.5" (65mm) QUARTER TURN HYDRANT VALVE Quarter-turn aluminum ball valves provide a positive shutoff. Full flow 2.5" (65 mm) waterway provides maximum flow with minimal loss. Quarter turn valve handle has low force to move even under pressure. Rugged lightweight aluminum alloy casting with durable powder coat finish inside and out, hard coat anodized couplings, super tough nylon folding handle. 2.5" (65 mm) NH female swivel long handle inlet coupling is standard.
|
|
|
AN3T1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN4R2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN3T2T02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AR3R2T2T2T |
HYDRANT ASSIST VALVE 4.5" RL/FS
|
|
|
|
|
AVGSC3FHNJNJ |
HI-RISE VALVE LH W/ GAUGE
|
|
|
AR5R2P2P2P |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
AN7X7X02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AR5P2T2T2T |
HYDRANT ASSIST VALVE 4.0"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
AR3P2T2T2T |
HYDRANT ASSIST VALVE 4.0"NHF RL/FS
|
|
|
AN4P2P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AVGSC3SNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
AL43R0 |
4-WAY VALVED MANIFOLD LONG DESCRIPTION
|
|
|
AR3R2P2P2P |
HYDRANT ASSIST VALVE 4.5"NHF RL/FS
|
|
|
AN6R1P02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AR5R7N7N3N |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AN2P2T31 |
IN-LINE VALVE W/PRV STANDARD GB
|
|
|
AVG2ENJNJM |
HI RISE 45 DEG ELBOW W/ GAUGE
|
|
|
AV5T-T-SC |
VALVE 2.5"CODE-T X 2.5"CODE-T SLOW CLOSE
|
|
|
AN5P2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
|
|
AN4R2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AVG2ENJNJM |
HI RISE 45 DEG ELBOW W/ GAUGE
|
|
|
AVGSC3FNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
AN3T1T02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AV5HNJ-NJ |
2.5" (65mm) QUARTER TURN HYDRANT VALVE Quarter-turn aluminum ball valves provide a positive shutoff. Full flow 2.5" (65 mm) waterway provides maximum flow with minimal loss. Quarter turn valve handle has low force to move even under pressure. Rugged lightweight aluminum alloy casting with durable powder coat finish inside and out, hard coat anodized couplings, super tough nylon folding handle. 2.5" (65 mm) NH female swivel long handle inlet coupling is standard.
|
|
AN3T1T01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN4R2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN3R2X02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AR3R2T2T2T |
HYDRANT ASSIST VALVE 4.5" RL/FS
|
|
|
AN3R2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN5R1P01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS3X1P1P1P |
HYDRANT ASST SO VALVE 6.0"NHF RL/FS
|
|
|
AR3P7P3P7P |
HYDRANT ASSIST VALVE 4.0"NHF RL/FS
|
|
|
AN5R1P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AR5P2P2P2P |
HYDRANT ASSIST VALVE 4.0"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
|
|
AR5T1P1P1P |
HYDRANT ASSIST VALVE 5.0"NHF HANDLE/FS
|
|
|
AN6T2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AR3R1T1T1T |
HYDRANT ASSIST VALVE 4.5"NHF RL/FS
|
|
|
AN4T2P02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN5R1T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AN3N1P02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
AN5P7P02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN5P7P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN2P1P02 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5" (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 300 psi (20 bar). Meets 900 psi (62 bar) hydrostatic strength test. The aluminum casting are Hard coat anodized, and Powder Coat finished inside and out for maximum corrosion protection. The valve meets NFPA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN2P1P01 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN5R2T02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN5R1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN5R2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AV5NL-NJ-SC |
VALVE 3.0"NHF X 2.5"NHM SLOW CLOSE
|
|
|
AN3P1T01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
|
|
AN3T1T31 |
IN-LINE VALVE WITH STANDARD GEARBOX, PRV & DRAIN TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS3T2T2T2T |
HYDRANT ASST SO VALVE 5" RL/FS
|
|
|
ARS3X3P3P3P |
HYDRANT ASST SO VALVE 6.0"NHF RL/FS
|
|
|
AN3P3P32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN5P7P32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AR5T1P1P1P |
HYDRANT ASSIST VALVE 5.0"NHF HANDLE/FS
|
|
AR5R1P1P1P |
HYDRANT ASSIST VALVE 4.5" HANDLE/FS
|
|
|
AN6T2P01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
AR5R1T7R1T |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AN3P1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN3P2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
AN2T2T01 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5" (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 300 psi (21 bar). Meets 900 psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and Powder Coat finished inside and out for maximum corrosion protection. The valve meets NFPA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS5P1T1T1T |
HYDRANT ASST SO VALVE 4.0"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
AN3P2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
AN2T2T02 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
|
|
ARS3T2T2T2T |
HYDRANT ASST SO VALVE 5" RL/FS
|
|
|
ARS3X3P3P3P |
HYDRANT ASST SO VALVE 6.0"NHF RL/FS
|
|
|
AN5P7P32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN6X1P02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AR5R1P1P1P |
HYDRANT ASSIST VALVE 4.5" HANDLE/FS
|
|
|
AR5R1T7R1T |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
AN3P1T32 |
IN-LINE VALVE W/ PRV PARALLEL GB
|
|
|
AN3P2T01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
|
AN2T2T01 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5" (90, 100, 114, 125 or 150 mm) hose. Maximum operating pressure is 300 psi (21 bar). Meets 900 psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and Powder Coat finished inside and out for maximum corrosion protection. The valve meets NFPA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS5P1T1T1T |
HYDRANT ASST SO VALVE 4.0"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
AN3P2T02 |
IN-LINE VALVE W/O PRV PARALLEL GB LONG DESCRIPTION
|
|
|
AN2T2T02 |
IN-LINE VALVE MOBILE/LOOSE or APPARATUS/FIXED TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (90, 100, 114, 125 or 150 mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾" (19 mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
ARS3P2P2P2P |
HYDRANT ASST SO VALVE 4.0"NHF RL/FS
|
|
|
AN3P1T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AV5S-S |
VALVE 2.5" CODE-S-F X 2.5" CODE-S-M
|
|
|
|
|
AR5R2P2P2P |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
AV5S-S |
VALVE 2.5" CODE-S-F X 2.5" CODE-S-M
|
|
|
AN7X7X02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AN1T2T31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AR5P2T2T2T |
HYDRANT ASSIST VALVE 4.0"NHF HANDLE/FS LONG DESCRIPTION
|
|
|
AN6R3N01 |
IN-LINE VALVE W/O PRV STANDARD GB
|
|
AN1P1P02 |
IN-LINE VALVE WITH PARALLEL SHAFT DRIVE GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (89, 100, 115, 125 or 150mm) hose. Maximum operating pressure is 250 psi (17bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾ inch (19mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AR3P2T2T2T |
HYDRANT ASSIST VALVE 4.0"NHF RL/FS
|
|
AN1P1P01 |
IN-LINE VALVE WITH STANDARD GEARBOX TFT's In-Line Valve is a multi-purpose valve designed for use with 3.5, 4, 4.5 or 5 inch (89, 100, 115, 125 or 150mm) hose. Full time swiveling inlet design makes these models ideal for use on the ground for water supply operations when the valve may need to be rotated easily after tightening. Maximum operating pressure is 300 psi (20 bar). Meets 900psi (62 bar) hydrostatic strength test. The aluminum casting are Hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. The valve meets NPFA slow close requirements. Optional adjustable pressure relief valve meets NFPA 1900. Optional rugged ¾ inch (19mm) air bleed valve quickly bleeds air from the lines or drains water from the valve housing. Contact TFT customer service for configurations not shown.
|
|
|
AN4P2P31 |
IN-LINE VALVE W/ PRV STANDARD GB
|
|
|
AVGSC3SNJNJ |
HI-RISE VALVE W/ GAUGE
|
|
|
AL43R0 |
4-WAY VALVED MANIFOLD LONG DESCRIPTION
|
|
|
AR3R2P2P2P |
HYDRANT ASSIST VALVE 4.5"NHF RL/FS
|
|
|
AN6R1P02 |
IN-LINE VALVE W/O PRV PARALLEL GB
|
|
|
AR5R7N7N3N |
HYDRANT ASSIST VALVE 4.5"NHF HANDLE/FS
|
|
|
|
|
New User?
