|
U-STRAP |
WAIST STRAP adjustable 1-1/2" (38mm) wide waist strap helps keep the PRO/pak at your side.
|
|
|
UM12-TANK |
TANK REPLACEMENT: PRO/PAK ENGLISH TEXT
|
|
U-HS6 |
DISCHARGE HOSE for adding length between the PRO/pak and the nozzle for maneuverability. Maximum distance is 25 feet (7.6m). Quick connect ¾" (19 mm) hose has a 300 psi (21 bar) pressure rating.
|
|
U-HS12 |
DISCHARGE HOSE for adding length between the PRO/pak and the nozzle for maneuverability. Maximum distance is 25 feet (7.6m). Quick connect ¾" (19 mm) hose has a 300 psi (21 bar) pressure rating.
|
|
|
UPRIM-MX |
MX FOAM NOZZLE
|
|
U-HS25 |
DISCHARGE HOSE for adding length between the PRO/pak and the nozzle for maneuverability. Maximum distance is 25 feet (7.6m). Quick connect ¾" (19 mm) hose has a 300 psi (21 bar) pressure rating.
|
|
|
UPRIM-LX |
LX FOAM NOZZLE
|
|
|
U-A-NDP |
ADAPTER 1.0" X PRO/PAK CONNECT
|
|
U-LX12 |
LOW EXPANSION NOZZLE can be used with either Class A or B foam solutions. Reach is slightly less than the straight stream. It should be used on Class B fires for extinguishment and Class A fuels to soak the fuel with a wet foam solution.
|
|
U-MX12 |
MEDIUM EXPANSION NOZZLE produces the greatest expansion ratios. It should be used on Class B fuels for vapor suppression and Class A fuels when a longer lasting insulating layer of drier foam is desired.
|
|
U-B |
PRO/pak STORAGE BRACKET s used to mount to horizontal or vertical surfaces. Adjustable quick release storage strap included. 12" x 11.5" x 14.75" (30.5 x 29.2 x 37.5cm)
|
|
U-SS12 |
STRAIGHT STREAM NOZZLE for Class A foam solutions. Foam expansion will be negligible. It should be used where maximum reach or penetration is desired.
|
|
U-HS |
DISCHARGE HOSE for adding length between the PRO/pak and the nozzle for maneuverability. Maximum distance is 25 feet (7.6m). Quick connect ¾" (19 mm) hose has a 300 psi (21 bar) pressure rating.
|
|
U-PN12 |
PRO/pak PIERCING NOZZLE Six jets distribute the flow in a 360° pattern. Foam expansion is negligible. Flow rate is 12 gpm at 100 psi (45 l/min @ 7 bar) inlet pressure to the PRO/pak. The nozzle is 42" (106.7cm) long with a quick-connect coupling.
|
New User?
